Menu

Pressure Relief Valve (End of line, weight loaded)

Model No: 140 Discharge to atmosphere, weight-loaded pallet assembly

Designed for installation on bulk storage tanks, ERGIL Storagetech™’s Model 140 Pressure Relief Valve is designed to protect the tank from excessive internal pressure.

In the closed position the weighted-loaded pallet and diaphragm assembly is held tightly against a seal to prevent the loss of vapour to atmosphere. As the internal pressure in the tank increases, due to product filling and vapour development, the pressure in tank increases and in the event that the set pressure of the unit is reached, the diaphragm will open and discharge the gas to atmosphere. The opening set-point is selectable from a range between +2.0 mbar and +60 mbar. (+0.8 inch W.C and +24 inch W.C), and the valve will close when the tank returns to a safe pressure.

The outlet port is protected by a weather hood and mesh guard to prevent ingress of debris that might obstruct the opening.

Several features are inherent in the valve design to ensure a smooth, positive and effective operation. The body is self-draining and drip rings prevent condensate from settling on seating surfaces. A diaphragm and seal manufactured from Teflon reduce the possibility of ice formation and sticky residues hindering the valve from opening, while the pallet assembly moves freely on guide posts.

Setting Range

Pressure: Weight-loaded +2.0 mbar and +60 mbar. (+0.8 inch W.C and +24 inch W.C)
* Different settings can be done as per request.
Ambient temp: -20°C to +60°C


Construction

Standard sizes: 2” to 12” 50 to 300mm
Flanges: API Class 150 RF, DIN PN16
Body: Carbon steel, stainless steel, or aluminium
Seals: Nitrile, Teflon, and Klingrit
Pallet: Stainless steel AISI 304
Weights: Carbon steel, stainless steel, or aluminium
Paint finish1-) Powder Coating, Colour RAL 9006
2-) Epoxy Paint, Colour RAL 9006
3-) Customer Specification
ATEX cert: Ex II 1/2 G c IIB


Design & Manufacturing Specifications

The integrity of the seal is tested for leakage in accordance with API Standard 2521 - Use of Pressure-Vacuum Vent Valves for Atmospheric Loss.

The size of the vent should be calculated in accordance with API Standard 2000 (ISO 28300) - Venting Atmospheric and Low-Pressure Storage Tanks or other international standards.

Additional Information

Data sheet, Pressure Relief, Vacuum Relief, and Pressure-Vacuum Relief Valves

Aager uses cookies to help us give you the best experience on our website. To find out more about the cookies we use and how to control them, please visit our privacy, cookies and data protection page.

Accept Cookies